INSTRUCTION MANUAL
Doc. no MN4003E Rev. A - Mar 2012
Nova Blast Helmet
IMPORTANT WARNING FOR SAFER BLAST CLEANING
1. Use protective equipment: Abrasive-resistant clothing, safety shoes, leather gloves,
ear protection, CE-approved air-fed helmet. Air for helmet must be supplied by a
breathing air compressor or through a helmet air filter.
2. Check for possible silicosis hazards. Avoid dust.
3. Do not blast with damaged or worn equipment.
4. Point nozzle only at area being cleaned.
5. Use only proper dry and well-screened abrasives specifically intended blasting.
6. Keep unprotected workers out of the blast area.
7. Before blasting:
- Check fittings and hose for wear.
- Safety-wire couplings together.
- Check helmet filters and air supply.
- Check pop-up valve for alignment.
- Test remote controls.
- Make sure blast machine is adequately grounded.
8. Do not weld on blast machine, this voids approval.
9. Do not substitute Airblast parts or modified equipment in any way.
Airblast B.V.
P.O. Box 1075
1700 BB Heerhugowaard
The Netherlands
Tel. : + 31 72 5718002
Fax : + 31 72 5714340
Email : [email protected]
Web : www.airblast.com
EN271: 1995
Содержание 4700000
Страница 10: ...Page 8 NOTES...
Страница 11: ...Page 9 NOTES...