13
Bus Mix
Use this section to adjust the settings for the three bus mixes:
The columns represent
Operators 1
–
4
, the
Sample
layer, and the submix
Panning
.
The rows represent the signal path to
FX 1
–
3
. Rows 1 and 2 are also routed through
Filter 1
and
2
, respectively.
Row 3 does not pass through either filter.
All submix outputs will be routed through the
Global FX 1
–
2
, if active.
Parameter
Description
Value Range
Operator 1–4
Volume level of the operator in each submix.
0–100%
Sample
Level of sample layer audio in each submix.
0–100%
Pan Stereo
panning of each submix.
L64 – C – R64
