Air Techniques, Inc.
Page 10
2.3.5 Circuit diagram
The connection to the mains voltage supply must only be carried out by a qualified electrician! (with
the exception of the ready to plug-in supplied stations for connection to the safety plug socket).
Figure 2.
Circuit diagram for one-phase alternating current
2.4
Initial operation
• Make sure the product pressure switch is off.
• Check the connections are correct to the compressed air components.
• Make sure the machine is correctly connected to the power supply.
• Check that the air filter is correctly fitted.
• Switch the compressor station on at the pressure switch.
• Listen during operation for unusual noises.
• Check the switch-off pressure of the product.
• Check the switch-on pressure of the station by releasing the pressure.
• Check the safety valve for correct function.
Advice! Write down the correct operation in the equipment log book.
Transport, Storage, Initial Operation
