Tech Support # 1-888-332-2241
INST SL-701 110124
or 1-248-332-3900
1
To get FPM from
CFM
:
CFM / (
Duct
W’ x Duct H’)
SL-701 DUCT CARBON MONOXIDE DETECTOR KIT
INSTALLATION AND MAINTENANCE INSTRUCTIONS
PRODUCT OVERVIEW
CONTENTS
•
SL-701 Duct Carbon Monoxide Detector
•
MSR-50/CO Remote Accessory
•
FAST Sample Tube Assembly Kit
•
8” FAST Exhaust Tube
•
Mounting Template and Screws
SL-701 SPECIFICATIONS
Input Power Standby
Current
Alarm
Current
24VAC
43 mA
246 mA
24VDC
28 mA
187 mA
115VAC
23 mA
50 mA
230VAC
11 mA
28 mA
Relay Contact Ratings:
Alarm contacts: (2) Sets of form “C” rated 10A @
115VAC resistive (1) form “A” rated at 2A
Trouble contacts: (1) Set of form “C” rated 10A @
115VAC resistive
Air Velocity:
100 to 4000 feet per minute
Ambient temperature:
32˚F to 140˚F (0˚C to 60˚C)
Humidity:
10% to 85% RH Non-Condensing/Non-Freezing
Dimensions:
13 ½”L × 4 ½“W × 2 ¼“D
MSR-50/CO SPECIFICATIONS
Current Draw
Standby 0 mA
Alarm 105 mA
Audible
Hi 69 db @ 10’ Lo 54 db @ 10’
Format
ANSI Temporal
4
Continuous
Visual
2 CD on axis
1 HZ (1/S)
PRODUCT APPLICATION
The SL-701 duct carbon monoxide detector kit
provides early detection of carbon monoxide in
air
moving through the HVAC duct supply, return, or
both in commercial, industrial, or residential
applications. Complete HVAC systems can be shut
down in the event of carbon monoxide detection.
The included MSR-50CO remote accessory can be
used to provide Private Mode (non-public) audible
and visual alarm indication in a remote location.
Combination CO / Fire alarm control units can, and
must, be notified of an alarm or trouble condition
to provide Public Mode Notification and Remote
Reporting.
NOTE: The SL-701 is intended to be connected to
a fire alarm control unit or combination control
unit if present. Please refer to NFPA 720 (Standard
for the Installation of Carbon Monoxide (CO)
Detection and Warning Equipment) and NFPA 72
(National Fire Alarm and Signaling Code).
This is not a duct smoke detector (UL 268A) or
“CO alarm” (UL 2034) and is not designed to
detect smoke, fire or any gas other than carbon
monoxide as caused by fossil fuel fired appliances
and / or as introduced from the outside in fresh air
intakes in the HVAC system. The SL-701 is a CO
system detector (UL 2075).
PRODUCT DESCRIPTION
The SL-701 duct mounted carbon monoxide
detector is fitted with an electrochemical sensor
that is able to detect four levels of carbon
monoxide and has a life of approximately six years
in normal environmental conditions.
NOTE: Areas of high or low temperature and low
humidity will reduce the life expectancy of the
sensor. In all cases, an end of life trouble report will
be signaled.
The detector has two sets of form “C” alarm
contacts, one set of form “A” alarm contacts, and
one set of form “C” trouble contacts. The alarm
