Instructions for Proper Use
1. Turn the top of the humidifier counterclockwise to open (Figure
3). Pour a maximum of 2.5 liters of water into the tank. Make sure
you soak both absorption tubes in water according to step 2 be-
fore proceeding. Place the top back on the humidifier and rotate
it clockwise until it tightens (Figure 4).
2. Open the water tank and pull down on the absorption tubes to
remove them (Figure 5). Be careful not to lose the springs under
the absorption tubes. Soak both ends of the tubes in water for a
few seconds (Figure 6). Insert the absorption tubes back into the
humidifier (Figure 7).
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
