a
Diffusion power
b
Empty tank indicator
c
Negative Ionisation indicator
d
Automatic mode indicator
e
Warm mist indicator
f
HygroSmart
®
indicator
g
Electronic Hygrostat indicator
DIGITAL DISPLAY (SEE PAGE 3)
USE PRECAUTIONS
1
Mist outlet
2
Top cover
3
Handle
4
Water tank
5
Water inlet
6
Cartridge filtration
7
Tank cap
8
Air outlet
9
Digital control panel
10
Magnetic needle
11
Power cord and plug
12
Ultrasonic plate
13
PTC heating plate
14
Essential oils compartment
COMPONENTS (SEE PAGE 2)
• Never connect the appliance when the tank is completely empty.
• Fill the tank with tap water or demineralised water. Do not fill the tank with softened water
with a salt softener.
• Make sure the product is placed on a dry, level surface and 10 cm away from the wall.
• Before first use or after transportation, the unit will take approximately 30 minutes to display
the actual room temperature and humidity.
• Make sure that the removable filter and the tank are correctly positioned and depressed.
• Do not remove the float from the tank, as this will prevent the unit from starting.
1. Fill the tank.
2. Plug the power cord in an electrical socket.
3. Turn the appliance on using the ON-OFF button (
C
). After pressing the ON-OFF button, the
digital display shows the humidity and temperature measured in the room thanks to the
sensor on the power cord (± 5% error margin) and the The device starts in Automatic Mode
(a light comes on:
d
).
4. Press the buttons of the touch control panel to select the different modes..
1
Take the tank by the handle and lift it.
2
Turn the tank over, unscrew the cap.
3
Fill the tank with cold water. Do not fill it with hot water, it could create some leaks.
4
Screw back the cap clockwise.
5
Replace the tank on its base, using the float as a guide.
For safety reasons and to avoid overheating the unit, the humidifier will turn off automatically
when the tank is empty and the indicator
b
lights up.
OPERATING INSTRUCTIONS
FILLING THE TANK (SEE PAGE 3)
A
Hygrometer
B
Thermometer
C
ON-OFF button
D
HygroSmart
®
Function
E
Electronic hygrostat Function
F
Negative Ionisation Function
G
Mist power
H
Warm mist mode
14
15
Содержание air & me CLEVAIR 2
Страница 20: ...SGS...
Страница 21: ...18 22 rue d Arras B t B13 92000 NANTERRE FRANCE info airandme fr 339 72 232 232...