4. Web Management: Wireless and WAN Settings
53
AirLive WLA-9000AP User’s Manual
Configure the WMM QoS Parameters
AC Type
The queue and associated priorities and parameters for transmission are as follows:
Data 0 (Best Effort, BE):
Medium priority queue, medium throughput anddel ay.
Most traditional IP data is sent to this queue.
Data 1 (Background, BK):
Lowest priority queue, high throughput. Bulk data
that requires maximum throughput and is not time-sensitive is sent to this queue
(FTP data, for example):
Data 2 (Video, VI):
High priority queue, minimum delay. Time-sensitive data
such as Video and other streaming media are automatically sent to this queue.
Data 3 (Voice, VO):
Highest priority queue, minimum delay. Time-sensitive
data such as Voice over IP (VoIP) is automatically sent to this queue.
Packets in a higher priority queue will be transmitted before packets in a lower
priority queue.
ECWmin and ECWmax
If an access point detects that the medium is in use, it uses the DCF random backoff
timer to determine the amount of time to wait before attempting to access a given
channel again. Each access point waits some random period of time between retries.
The wait time (initially a random value within a range specified as the
Minimum
Содержание WLA-9000AP
Страница 1: ...WLA 9000AP 108Mbps 802 11a b g Dual Radio Access Point User s Manual ...
Страница 7: ......
Страница 12: ...1 Introduction 5 AirLive WLA 9000AP User s Manual ...
