manualshive.com logo in svg

Air Live WHA-5500CPE-NT, Руководство пользователя, Страница: 79 / 161

Поделиться
Скачать
Air Live WHA-5500CPE-NT Скачать руководство пользователя страница 79

5.  Web Management2: System Configuration, Tools and Status 

 

 

 

73 

                       

AirLive WHA-5500CPE-NT User’s Manual

 

5.1.6 Firmware Upgrade 

System Configuration -> Firmware Upgrade

 

 
can upgrade the firmware of your WHA-5500CPE-NT (the software that controls your 
WHA-5500CPE-NT’s operation). Normally, this is done when a new version of firmware 
offers new features that you want, or solves problems that you have encountered with the 
current version.   

 

 

„

 

Upgrade Firmware:   

To update the WHA-5500CPE-NT firmware, first download the firmware from AirLive 
web site to your local disk, and then from the above screen enter the path and filename 
of the firmware file (or click 

Browse 

to locate the firmware file). Next, Click the 

Upgrade 

button to start.   

The new firmware will be loaded to your WHA-5500CPE-NT. After a message appears 
telling you that the operation is completed, you need to reset the system to have the 
new firmware take effect.   
 

 

Do not power off the device while upgrading the firmware. 
It is recommended that you do not upgrade your WHA-5500CPE-NT 
unless the new firmware has new features you need or if it has a fix to 
a problem that you’ve encountered. 

 
 
 

5.1.7 Configuration Save and Restore 

System Configuration -> Configuration Save and Restore

 

 
You can save system configuration settings to a file, and later download it back to the 
WHA-5500CPE-NT by following the steps.   

Step 1

 Select 

Configuration Save and Restore

 from the 

System Configurations

 menu.

 

Содержание WHA-5500CPE-NT


































































































































































Отзывы:

Нет отзывов