Air Live SI-108 Скачать руководство пользователя страница 5

Страница: 5 / 16

AirLive SI-108 User Manual

Overview

The SI-108, is a Z-Wave plus compliant Z-Wave-to-IR Bridge to control Air Conditioner by

receiving Z-Wave command and translating it to Infrared command. With it

’s

comprehensive built-In IR Code library. SI-108 can control different brands and models of

Air Conditioners worldwide. The SI-108 is a security enabled Z-Wave plus device. A

security Enabled Z-Wave Plus Controller must be used in order to fully utilize the product.

The SI-108 is a Z-Wave slave device; it depends on the gateway on how to setup a

particular AC brand with the correct IR code. Different gateway

’s have different user

interfaces for setup.

This product can be included and operated in any Z-WaveTM network with other

Z-WaveTM certified devices from other manufacturers and/or other applications. All

non-battery operated nodes within the network will act as repeaters regardless of vendor to

increase reliability of the network.

The device adopts the Z-WaveTM 500 series chip, when your Z-WaveTM network system

is all made by Z-WaveTM 500 series devices. The network system will have the

advantages.

Содержание SI-108
















