4. Web Management-Wireless and WAN Settings
55
AirLive AIRMAX5 User’s Manual
Enable VLAN for All SSIDs:
Once this function is enabled, you can specify an
individual VLAN ID and priority tag for each SSID. The packets from a SSID will
be forwarded to the Ethernet with the corresponding configured VLAN ID written.
You need to click on the top “APPLY” button after making changes.
Enable DiffServ Marking:
When this function is enabled, you can configure a
DSCP value for each SSID. Then a packet from a station using this SSID will be
forwarded with the DSCP value labeled.
You need to click on the top “APPLY”
button after making changes.
VLAN ID:
Packets going out of this VLAN will be tagged with the VLAN ID.
Packets coming into the AP will be dropped if the VLAN Tag does not match.
The valid range is between 0 to 4095. The VLAN ID “0” is the default VLAN
group.
VLAN IP:
Each SSID can be given with different VLAN IP group. Please notice
that the management IP in the VLAN will also be changed. For example, if you
define the VLAN IP to be 192.168.2.X subnet, then the AIrMax5’s management IP
in the group will change to 192.168.2.1.
VLAN IP NetMask:
Define your VLAN IP scope here
802.1p Priority:
Define your 802.1p priority Tag here. Value from 0 to 7
Select DSCP TYPE:
Assign the 6-digit DifferServ Code(DSCP) for the packets
in the SSID network for QoS purpose. There are 8 preset values. To assign
your own value, please select “Best Effort”
DSCP Value:
When you select “Best Effort” DSCP Type, you can enter the
6-dgit DSCP Value here.
Select Security Policy:
Select the encryption used for this SSID VLAN group.
This policy can be different in each SSID VLAN group. For example, one SSID
can be using WEP, the other policy can use WPA-PSK.
Once you enable the VLAN ID. The incoming packet from
Ethernet port to your VLAN group must carry the same VLAN ID tag
or the packet will be dropped.