Air Liquide Respireo Primo P, Руководство пользователя

Страница: 11 / 56

11
10 - TROUBLE-SHOOTING CHART
PROBLEMS POSSIBLE CAUSES SOLUTIONS
• No air or
insufficient air
comes out of the
mask
• Flow generator off
• Flow generator
regulated wrongly
• Patient circuit tube
not inserted
• Switch on the flow
generator
• Regulate the flow
generator
• Connect the tube
to the flow generator
and mask
• The mask is
noisy
• Nasal pillows
mounted incorrectly
and air leak
• Mount the cushions
correctly as instructed
• The nasal
pillows do not
fit into the nasal
cavity
• You are using the
wrong size
• Replace with a more
suitable size (sizes
available S - M - L)
• Exhaled air does
not flow out and
difficulty inhaling
• Vent ports
obstructed
• Remove the
obstruction
11 - DISPOSAL INSTRUCTIONS
The components of the mask are made of the following materials
and must be disposed of in accordance with the applicable laws.
COMPONENT MATERIAL
Nasal pillows Silicone
Main body Nylon
Elbow Polycarbonate
Tube Metallocene
Connector Acetalic
Swivel fitting Polycarbonate
Headgear Nylon/Polyurethane
Tube strap Nylon
Rear buckle Nylon
Top buckle Nylon
ENGLISH
12 - TECHNICAL DATA
MINIMUM CONTINUOUS FLOW
REMARK: Due to manufacturing differences, the exhalation flow
rate may differ from the values shown in the table (±10%).
Normative references CE marking in accordance with
European Directive 93/42/EEC, class
IIa and subsequent amendments. EN
ISO 14971, ISO 5356-1, ISO 10993-1,
EN ISO 17510-2
Resistance at 50 lpm: 0,6 cmH
2
O - at 100 lpm: 2
cmH
2
O
A-weighted sound
pressure level
according to ISO 3744
11,5 dB(A) ± 1,5 dB(A)
A-weighted sound
power level according
to ISO 3744
18,2 dB(A) ± 1,5 dB(A)
Operating pressure 4 – 40 cmH
2
O
Temperature range 5 – 40 °C
Dead space (mask and
tube assembly) 81 ml