Air innovations WINE GUARDIAN DS025, Инструкция по установке, эксплуатации и обслуживанию, Страница: 46 / 61

46
Alarm Codes
Default %RH
Setting 71
•
Press “Settings” button to advance to
Setting 71.
No setting adjustment.
Initial relative humidity set point. Will
revert to this setting upon loss of power.
Default mode
Setting 72
•
Press “Settings” button to advance to
Setting 72.
•
Press the “Up” or “Down” buttons to
adjust to the desired setpoint.
Initial mode set point. Will revert to this
setting upon loss of power.
1 = Auto
2 = Cool
3 = Heat
High temperature
alarm
Flashing
temperature number
Flashing temperature number along
with (!) symbol will remain on screen
until temperature falls below the High
Temperature Alarm set point (Setting
3).
Low temperature
alarm
Flashing
temperature number
Flashing temperature number along
with (!) symbol will remain on screen
until temperature rises above the Low
Temperature Alarm set point (Setting
2).
High humidity alarm
Flashing humidity
number
Flashing humidity number along with (!)
symbol will remain on screen until
humidity falls below the High Humidity
Alarm setpoint (Setting 5).