Air innovations WINE GUARDIAN DS025, Инструкция по установке, эксплуатации и обслуживанию, Страница: 39 / 61

39
Remote Interface Functions
How To:
Turn system
on/off
• Press the “On/Off” button once.
Note: There is a five (5) minute time
delay before the system turns on or
turns off.
Change
temperature
• Press the “Up” arrow once. The display
will show the existing temperature
setpoint.
• Press the up or down arrow buttons to
adjust the temperature to the desired set
point.
Change
humidity
• Press the “Up” arrow once. This display
will show the existing temperature
setpoint.
• Press the “Settings” button once to
display the “Humidity” setpoint. • Press
the “Up” or “Down” arrows to adjust the
humidity to the desired set point.
Note: A Wine Guardian humidifier
must be installed and Setting 6 set to
“1” or “2” before the controller will let
you change percent humidity.
Change
Settings
Cooling/
Heating / Auto
• Press the Setting button once to display
the setting function at the bottom of the
screen.
• Press the Settings button again to scroll
through settings for cool only, heat only or
heat/cool only (auto mode).
“Cool” Symbol
Battery Life
Humidity
Settings and
Defrost Area
Temperature
“Heat” Symbol
Alarms
Down Button Settings Button On/Off Button Up Button