Air innovations MH-401, Инструкция по эксплуатации

Страница: 6 / 12

Filling The Water Tank
CAUTION: Always unplug the unit before removing the Water Tank.
Do not touch the water in the base.
Grab the Water Tank with both
hands and lift it up to remove from
the Humidifier Base.
Turn the Water Tank upside down
and remove the Tank Cap by
turning it counterclockwise.
1
2
3
4
5
6
Fill the Water Tank with clean, cool,
tap water. Do not use extremely
cold water, since it may temporar-
ily reduce the mist output. Never
fill with hot/warm water or add
additives as this could damage
the unit and void the warranty.
Replace the Tank Cap by firmly
turning clockwise until tight. Turn
the Water Tank upright and check
the Tank Cap for leaks. If any water
drips, remove the Tank Cap and
retighten. Do not place Water
Tank on the Humidifier Base if the
cap is leaking.
Grab the Water Tank with both
hands and replace on the Humidi-
fier Base, make sure to follow the
shape of the Water Tank and the
Humidifier Base (as shown above),
so that the tank seats leveled and
flush to the base. Ensure the tank is
firmly seated.
Attach Filter (included) to the Tank
Cap by aligning the lock tabs on both
and turning the cap counterclockwise
to lock. When attached properly the
Filter will not fall from the Tank Cap.
4