Operating Instructions
NOTE: Do not operate the humidifier without a full water bottle attached.
1.
ON/OFF - Plug in to a 120V AC electrical outlet with the supplied power adapter. Press the
power button once and the indicator will illuminate. To turn OFF, press the button
twice and
the indicator will turn OFF.
2.
Mist Output – The unit will turn ON with the highest mist setting. To change to a low Mist
setting, press the button once more. Mist may not appear immediately; allow up to 10
minutes (on the highest setting) for the humidifier to fill.
4.
Low Water – When the water reservoir is out of water the automatic safety shut-off will turn
the Ultrasonic Nebulizer OFF. You might hear the fan for a few seconds, this is normal.
Storage
1. Follow all cleaning instructions prior to storage.
2. Dry all parts. Never leave water inside the unit for several days.
3. To prolong the life of the bottle adapter, do not store inside of bottle.
4. Preferably store in its original box, in a dry place away from high temperatures.
5. Follow all cleaning instructions after long periods of storage.
5
About White Dust
Use of high-mineral content water will cause a white mineral residue to accumulate on room
surfaces near the humidifier. The mineral residue is commonly called “white dust”. The higher
the mineral content (the harder your water is), the greater the potential for white dust. The white
dust is not caused by a defect in the humidifier, but is due only to minerals suspended in the
water. If you have hard tap water we recommend to use only filtered, distilled or bottled water to
minimize the white dust residue.
Содержание GH-2193
Страница 12: ...COMPACT PERSONAL ULTRASONIC HUMIDIFIER...