Remove the Water Tank from the Base.
For first use:
Remove the foam insert located above
the Water Sensor Float.
Fill the Tank with clean, cool water. Do not
allow water to enter the Mist Outlet.
Replace the Tank with the Mist Outlet
facing forward.
1
2
3
4
Filling The Water Tank
About White Dust
Use of high mineral content water may cause a white mineral residue to accumulate
on surfaces in the room near the humidifier. The mineral residue is commonly called
“white dust” and is caused by minerals suspended in the water. The higher the
mineral content (or, the harder your water is), the greater the potential for white dust.
The dust is not caused by a defect in the humidifier. To reduce white dust we
recommend using filtered or distilled water.
WARNING:
If you have
hard tap water
, we recommend using
ONLY
filtered or distilled water.
4
