Air innovations 99H0360-10, Инструкция по установке, эксплуатации и обслуживанию, Страница: 69 / 85

69
Alarm Codes
High temperature
alarm
Flashing temperature
number
Flashing temperature number along with (!)
symbol will remain on screen until
temperature falls below the High
Temperature Alarm set point (Setting 3).
Low temperature
alarm
Flashing temperature
number Flashing temperature number along with (!)
symbol will remain on screen until
temperature rises above the Low
Temperature Alarm set point (Setting 2).
High humidity alarm
Flashing humidity
number Flashing humidity number along with (!)
symbol will remain on screen until humidity
falls below the High Humidity Alarm
setpoint (Setting 5).
Low humidity alarm
Flashing humidity
number Flashing humidity number along with (!)
symbol will remain on screen until humidity
rises above the Low Humidity Alarm set
point (Setting 4).
!1 = High Pressure
Switch Fault THIS ALARM FORCES THE SYSTEM
TO SHUT DOWN
(!1) will remain on screen until the High
Pressure reset switch has been reset.
See the trouble shooting guide page 57 for
“Instructions to Reset High Pressure
Switch”.
!2 = CS (Condensate
Switch Fault) THIS ALARM FORCES THE SYSTEM
TO SHUT DOWN
(!2) will remain on screen until the CS
(condensate switch) fault is resolved and
reset.