TAP-A-FLOW™
COLD/HOT POTABLE
WATER VALVE
Placentia, California
Model:
Part No.
AG250-002
Doc. # 400-0766-002
500 Jefferson Street, Placentia, California 92870 USA • 949-955-3928 • Email: [email protected]
Copyright 2018 AIR GAP INTERNATIONAL
During installation, avoid unnecessary bends of the actuating cable.
The AG250-002 valve is maintenance-free.
CAUTION:
AG250-002
Unscrew the front nut (1) and insert the cable (4) through the slot
cable support bracket. See pedal instructions for more details and
exact slot location. The rear nut (3) remains at the end of the thread
(2). Adjust cable holder (2) for proper pedal operation and secure
it's position with nuts (1) and (3).Use 3/32 wrench for tightening
nuts(M5x0.8mm).
1.
VALVE TO PEDAL CONNECTION (SEE FIG. 2)
Verify that the actuating cable is inside the valve recepticle; see
Fig.3
2.
Insert cable end T-bar (5) into the pedal lever ( see instruction for
pedal )
3.
FIG. 2
3
1
2
4
5
FIG. 3