air
avionics
F. Configuration Parameters
F.4 Warnings
F.4.1 Warnings On-Ground
Description
Enable warnings while the aircraft sits on the ground or moves slower than the On-Ground
Threshold Speed. If this parameter is disabled, warnings are suppressed on ground.
•
Item Code:
WARNONGND
•
Valid Values:
ON, OFF
•
Default Value:
OFF
F.4.2 On-Ground Threshold Speed [m/s]
Description
Speed threshold (ground speed) for On-Ground detection. If warnings on ground are
disabled, this settings affects the output of alarms. Be very careful with this value!
•
Item Code:
ONGNDTHR
•
Valid Values:
integer value, 0 - 1000000
•
Default Value:
10
F.4.3 Protection Volume 1 Range [m]
Description
Adjusts the horizontal size of the ’protection volume 1’. Inside this volume, independent
from flight vectors, a certain threat level is set for any traffic target. Protection Volume 1
has the highest priority. It overrules all other protection volumes. Be very careful! Do not
change this value unless you know exactly what you are doing. Adjusting this parameter
wrongly may suppress traffic warnings.
•
Item Code:
PROTECTRANGE1
•
Valid Values:
integer value, 0 - 1000000
•
Default Value:
300
F.4.4 Protection Volume 1 Vertical Range [m]
Description
Adjusts the vertical size of the ’protection volume 1’. Inside this volume, independent from
flight vectors, a certain threat level is set for any traffic target. Protection Volume 1 has the
highest priority. It overrules all other protection volumes. Be very careful! Do not change
this value unless you know exactly what you are doing. Adjusting this parameter wrongly
may suppress traffic warnings.
•
Item Code:
PROTECTVRANGE1
AT-1
·
Installation Manual
·
rev. 4.0
·
2020/01/09
63
