- INSTRUCTIONS -
This monitor allows one or two MK video door stations to be used for video door answering, where the
communication is through a Panasonic® telephone system and the video appears on the Aiphone
monitor(s). The MY-CU-PH/A integrates MK PanTilt door stations with Panasonic's KX-T series
systems. (Works with KX-TA Advanced Hybrid series and KX-TD Digital Super Hybrid series.)
MY-CU-PH/A
Video Monitor
MK Video Door Answering with Panasonic® Phone System
MY-CU-PH/A TERMINAL DEFINITIONS:
1A1
2-Wire connection
1A2
for Door Station #1
2A1
2-Wire connection
2A2
for Door Station #2
B1
Video out to
B2
sub monitors
U1
Control wires
U2
Control wires
+
Positive 18V DC
-
Negative
To Panasonic Phone System:
D1
Door 1 call-in & audio
D2
Door 2 call-in & audio
E
Common audio
Special
Order
Products
WIRING DIAGRAM:
*VIDEO DOOR STATIONS:
Any Aiphone MK or MY Series video door
station can be used:
-MK-DAC: Surface mount, black
-MK-DBC: Semi-flush mount, black
-MK-DGC: Semi-flush mount, metal cover
-MK-DGV: Semi-flush mount, vandal
proof, stainless steel cover
-MY-DS: Surface mount, fixed camera,
Brown
1A1
1A2
2A1
2A2
B1
B2
+
-
U1
U2
D1
E
D2
MY-CU-PH/A
MK-DBC*
A1
A2
PS-18C
+
-
MK-DBC*
A1
A2
A1
A2
B1
B2
+
-
U1
U2
MYH-CU
B1
B2
A1
A2
+
-
U1
U2
MYH-CU
Pg. 1
1 2
3 4
PHONE JACK TERMINAL BLOCK WIRING
With
KX-TA62460
Doorphone card (Analog):
(Used with KX-TA624 System)
D1 = 1 (Green)
E = 2 (Red)
D2 = 3 (Black)
E = 4 (Yellow)
With
KX-TD160
Doorphone card (Digital):
(With KX-TD816 and KX-TD1232 systems)
D1 = 2 (Red)
E = 1 (Green)
D2 = 4 (Yellow)
E = 3 (Black)
Modular cord from
terminal block to
Door Adaptor in
Panasonic KSU
DA1
DA2
+
-
DV+
DV-
MYW-MD/A
VIDEO OUTPUT TO CABLE
DISTRIBUTION OR CCTV MONITOR:
Use Aiphone MYW-MD/A Demodulator,
wired with 4 conductor, 18 AWG wire
from the MY-CU-PH/A monitor or last
MYH-CU in the system. Output is a
standard 1V peak-to-peak video signal.
Move jumper to
bottom 2 pins
Raw video output
DV+ to core of Coax
DV- to shield of coax
PS-18YC/A
+
-
SPECIFICATIONS:
Power Source:
18V DC. Use PS-18C for up to three monitors.
Use PS-18YC/A for every additional two monitors.
Consumption:
MY-CU-PH/A Standby: 0.12A; Max. 0.9A
MYH-CU Standby: 0A; Max .4A
Communication:
Through Panasonic® Telephone system
Hands free at door station
Calling:
Monitors activate and Panasonic phones ring
Video Monitor:
4" direct view flat CRT
Scanning lines:
525 lines
Dimensions (HxWxD): 9" x 7-1/2" x 2-3/4"
Weight:
MY-CU-PH/A: 2.2 lbs.
MYH-CU: 1.98 lbs
Updated 05/2001
(Analog wiring shown)
