IXG-2C7, IXG-2C7-L
(Tenant Station)
Issue Date Mar. 2020 FK2530 A P0320 RQ 60259
Introduction
• Read this manual before installation and connection.
Read the "Setting Manual" and "Operation Manual". The manuals can be downloaded from our
homepage at "https://www.aiphone.net/support/software-document/" free of charge.
• After completing installation and connection, program the system according to the “Setting Manual”.
The system cannot operate unless it is programmed.
• After performing installation, review with the customer how to operate system.
Perform installation and connection only after gaining sufficient understanding of the
system and this manual.
Literature information
The important information concerning correct operation and what you should observe is marked with
the following symbols.
Indicates that users may require caution (including warning / caution).
Alerts users to prohibited actions.
Restricts user actions / provides instructions.
Tips and additional information for operation.
Example of System Configuration
LAN
IXG-DM7 (-HID)
IXG-2C7 (-L)
IXGW-GW
IXGW-LC
IX-MV7-HB
IXG-MK
PC (third party)
PoE switch
(third party)
Network Camera
(third party)
PoE switch
(third party)
PoE switch
(third party)
PoE switch
(third party)
PoE switch
(third party)
PoE switch
(third party)
PoE switch
(third party)
IX-DV
Status Indicator
Refer to "IXG-2C7(-L) Operation Manual" for additional indicators not listed below.
: Lit : Off
Status (pattern)
Description
Blue
flashing
0.75 sec
0.75 sec
Booting
0.5 sec
4 sec
Communication
failure
1
sec
0.25
sec
0.25
sec
0.25
sec
0.25
sec
0.25
sec
Firmware version
updating
Blue light
Standby (Depends
on setting)
Part Names and Accessories
IXG-2C7, IXG-2C7-L
LAN(PoE) port
Option connector terminal
microSD
TM
card slot
Back view
Front view
Hearing aid T-mode
compatibility symbol
(IXG-2C7-L only)
Status indicator (Blue)
Microphone
Speaker
Speaker
Touchscreen LCD
(hearing aid-compatible)
Mounting
bracket ×1
(attached to the station)
Installation
Manual ×1
(this manual)
Download
guide ×1
Option
connector ×2
(10 pin ×1, 4 pin ×1)
Cable tie ×1
Included accessories
MAC address
Chinese RoHS
declaration
×1
(IXG-2C7 only)
Choose a microSD card (sold separately) using the recommended specifications below (these are
referred to collectively as "microSD cards").
Standard
Supported storage
capacity
Format
Speed class
microSDHC memory
cards
4 GB to 32 GB
FAT32
SD speed class 10
• A microSD card is not included with this station.
• Some microSD cards may not operate properly.
• If the card contains data other than video/audio files, it may not have enough space to record video/
audio recordings.
• The network camera may not be able to record video, depending on the size of the video.
• A maximum of 999 video/audio files can be saved. However, this may vary depending on the size of the
video/audio files and the capacity of the microSD card.
• Aiphone is not to be held responsible in any way for microSD cards.
Precautions
Warning
Negligence could result in death or serious injury.
Do not disassemble or modify the
station.
This may result in fire or electrical
shock.
Do not connect any terminals on
the station directly to an AC
power line.
This may result in fire or electrical
shock.
Do not, under any circumstances,
open the station.
Voltage within some internal
components may cause electrical
shock.
Caution
Negligence could result in injury to people or damage to
property.
Do not install or connect the
station with the power on.
This may result in electrical shock or
malfunction.
Make sure the wiring is correct
and there are no wiring shorts
before switching on the station.
This may result in fire or electrical
shock.
Install in a place where the station
will not get easily bumped.
This may result in injury.
Do not put your ear close to the
speaker when using the station.
May cause harm to the ear if a
sudden loud noise is emitted.
About microSD card
Installation Manual
General Precautions
• Install low-voltage lines at least 30cm (12") away from high-voltage lines (AC100V - 240V), especially inverter
air conditioner wiring. This may result in interference or malfunction.
Notice
• The illustrations used in this manual may differ from the actual product.
• If the station is used in areas where there are business-use wireless devices such as a transceiver or mobile
phones, it may cause malfunction.
• If the station is installed in an area with an extremely strong electrical field, such as in the vicinity of a
broadcasting station, it may create interference and cause malfunction.
Precautions for mounting
• Installing the device in the following locations could cause malfunction:
-
Locations under direct sunlight
-
Locations near heating equipment
-
Locations subject to liquid, iron filings, dust, oil, or chemicals
-
Locations subject to moisture and humidity extremes
-
Locations where the temperature is quite low
-
Locations subject to steam or oil smoke
-
Sulphurous environments
-
Locations close to the sea or directly exposed to sea breeze
• If existing wiring is used, the device may not operate properly. In that case, it will be necessary to replace the
wiring.
• Do not use an impact driver to fasten screws. Doing so may cause damage to the device.
• Avoid installing the station in concave space of a wall to prevent disconnection of communication.
• This unit is designed for indoor use only. Do not install at outdoor location.
