background image

– 1 –

HANDSET INTERCOM

Models;

AT-406,

Boxed Set

AT-406P,

Display pack Set

AT-306,

Add-on sub

AT-406B/A,

Boxed Set

,

tt charcoal gray color

83096400  0602 F

F

2

2

2

2

NAMES & FEATURES

AIPHONE

AT-206

CALL

AT-206

master

Battery check
LED

CALL button

Battery
compartment

AIPHONE

AT-306

CALL

AT-306

sub

CALL button

Features

2-handset communication system
suited for:
R.V. cab-to-camper, Boat deck-to-cabin,
Limo. chauffer to back seat, and
Restaurant kitchen to bar, etc.
• Up to 3 subs
• Electronic call tone, not adjustable
• Front loading batteries
• Battery or DC power supply
• External signaling device

1

AT-406 is a Handset Intercom set, allowing two-way calling & communication.

AT-306

Add-on sub (add’l 2 pcs max.)

Power supply:
SKK-620

in USA,

PS-6D, PS-6M

in Europe, or 4 pcs SUM-3(AA) batteries.

TAR-3

relay for external signaling device. Powered by a separate 6V DC power supply.

Components available

AT-406

Boxed set

AT-406P

Display pack set (N/A in USA)

AT-406B/A

Bexed set, charcoal gray color

1

1

1

1

SYSTEM OUTLINE & COMPONENTS

Package Contents

• Handset Intercom set (

AT-406,AT-406P,

AT-406B/A

) or Sub station (

AT-306

)

• Mounting bracket
• Packet of screws
• Installation & Operation Manual

2

AT-206

AT-306

PS6

Batteries

or

2

2

AT-306

AT-306

3

3

3

INSTALLATION

External signaling device

Any particular station can be signaled by bell or light, while it rings.
Install

TAR-3

relay powered by its own 6V DC power supply (

SKK-620,

PS-6D

or

PS-6M

).

TAR-3

Black(–)

Red(+)

Orange(2)

pwr.

Blue

White

AT-206

B

1
2

AT-306

1
2

PS6

TAR-3

Black(–)

Red(+)

Orange(2)

pwr.

Blue

White

AT-206

B

AT-306

1
2

1
2

PS6

Mounting

AT-406 set is designed for indoor use only.  Do not install outdoors.
It must be used in wall-mounted applications only.

Wiring

AT-406 can be wired with 2 non-polarized wires. When add-on sub(s)
is installed, connect in loop or home run. Keep audio wires 50cm, 20”
away from any AC wiring, fluorescent lights, dimmer switches, etc.

AIPHONE

AT-206

CALL

AIPHONE

AT-206

CALL

Cover

Loading batteries

Slide down front battery cover.  Place four SUM-3 (AA)
batteries into compartment.  Observe polarity.

Battery LED indicator

1. LED is brightly lit.

➝ 

Batteries are powerful enough.

2. Becomes dim during use.

➝ 

Batteries are getting weaker.

3. LED is no longer lit.

Batteries are exhausted.  Replace
all four batteries with new ones.

INSTALLATION & OPERATION MANUAL

Warning

(Negligence could result in death or serious injury to people)

 Do not connect any power source other than specified to

ter, 

. Do not connect AC wires to any terminal 

on any unit. Fire or unit damage could result.

 Do not dismantle or alter the intercom.

 When placing the batteries inside the compartment, observe 

polarity as marked inside.  If batteries are damaged, 

fire, injury, or contamination to environment may result.

For DC powered systems, use Aiphone power supply model specified with

system. If non-specified product is used, fire or malfunction could result.

Precautions

 The intercom station is designed for indoor use and for wall
 -mounting only. 

 Do not install the intercom in any of the following locations,
as it may cause the system to malfunction:

High or extreme cold temperature area: 

under direct 

sunlight, near equipment that varies in temperature, in front of

air-conditioner, inside a refrigerated area, etc.

Places subject to moisture or humidity extremes.

Places subject to environmental conditions, 

such as oil,

dust, chemicals, salt, etc.

Places subject to constant vibration or impact.

Places subject to steam or smoke,

 such as near heating

appliances, cooking surface, etc.

General Precautions

Caution

(Negligence could result in injury or damage to property.)

・ 

Do not manually hold hook switch down while holding handset, as 

     the call tone sounds very loud through handset receiver,
     and can cause your hearing damage.

 Mount the intercom on wall in a convenient location, but not

     where it could be bumped or jarred. Injury could result.

General prohibitions

Prohibitions to dismantle the unit

Prohibitions to subject the unt to water

Отзывы: