Aiphone AN-8000EX Скачать руководство пользователя страница 58

Страница: 58 / 244

2-10

Chapter 2: FUNCTIONS AND OPERATION

2.4.2. One-touch dialing

The dial operation (up to 20-digit numbers) programmed
into the station's [7], [8], [9], [0], or [Off-Hook*] keys can be
called by one-touch dialing.

* The action to lift up the handset.

Notes

• Perform one-touch dial programming when using the

external dial input terminal on the AN-8031MS.

• The one-touch programming can be performed either by dialing operation (see below) or using the supplied

AN-8000 Software program. (Refer to

p. 5-46

p. 5-50

Call

No. 200

PTT

(Confirmation tone)

Function

designation No.

dial to be programmed

(up to 20 digits)

One-touch
dialing key

PTT

(Confirmation tone)

PTT

Function

designation No.

dial to be programmed

(Example) Function designation number of Call forwarding

One-touch
dialing key

PTT

Function

designation No.

dial to be programmed

One-touch
dialing key

PTT

Function

designation No.

One-touch
dialing key

[Programming]

[Erasure]

Tips

• The key X above represents the [7], [8], [9], [0], or Push-to-talk keys, which are used for one-touch

functions.

• Enter one-touch dialing programming (the key Y above) using the Dial keys (12), Paging key, and/or

Function key.

[Example] Programming [7] key for function designation number of Call forwarding.

• Press the Push-to-talk key when enabling the Off-Hook function for one-touch key operation.

[Example] Programming and erasing of station [1][2][3] for the Off-Hook function.

[Programming]

[Erasure]

Note

The programmed contents by dialing operation are automatically saved into the exchange or IP
stations at midnight every day. If the exchange or IP station is turned off before completion of save,
such programmed contents are all cancelled.

Содержание AN-8000EX





















































































































































































































































Результаты поиска

Содержание AN-8000EX

Отзывы:

Aiphone AN-8000EX, Руководство по эксплуатации, Страница: 58 / 244

Результаты поиска

Содержание AN-8000EX

Отзывы: