Aiphone AN-8000EX Скачать руководство пользователя страница 190 | Manualshive

Страница: 190 / 244

Aiphone AN-8000EX Скачать руководство пользователя страница 190

5-58

Chapter 5: SYSTEM SETTINGS BY SOFTWARE

7. CHANGING THE PASSWORD

There are two passwords. One is a "system password" used with the AN-8000 software and browser; the
other is a "station maintenance password" used by the AN-8000MS Multifunctional Master Station or the AN-
8500MS IP Multifunctional Master Station.

7.1. Changing the System Password

Step 1.

Click "Password Change" on the initial screen.

Dialog to change password is displayed.

Step 2.

In the [System name] entry box, enter a system name up to fifteen characters long after the change is
made. This name is case-sensitive, and cannot include colons (:).
• Enter the original system name even if it is the same.

Step 3.

In the [Password] entry box, enter a password up to fifteen characters long after the change is made.
This name is case-sensitive, and cannot include colons (:).
• Enter the original password even if it is the same.

Step 4.

Enter the changed password entered in

Step 3

in the [Password (reentry)] entry box for confirmation.

«
...
188
189
190
191
192
...
»

Содержание AN-8000EX





















































































































































































































































Отзывы:

Нет отзывов