Aim HPM 300, Руководство пользователя и информация о гарантии

Страница: 4 / 31

AIM Hybrid Pulse MIG Welder -HPM-350-HD
A IM MIG OWNER’S MANUAL Rev. 2019 :
| IMPORTANT SAFETY INSTRUCTIONS: 4
IMPORTANT SAFETY INSTRUCTIONS:
WARNING –
When operating this equipment, please follow basic precautions, including
the following:
•
Read all instructions before using this machine and its attachments.
•
Use this equipment only for its intended use.
•
All electrical service connections must be made by a qualified electrician. Risk of
electrical shock .
•
IMPORTANT ! The welder may only be used by qualified personnel.
•
Do not touch the work piece or welding tips during or immediately after use. Electrodes
become hot and may cause severe burns.
•
Make sure to use appropriate eye protection and other PPE when welding. The sparks
and bright arc can injure eyes and unprotected skin.
•
Do not weld near flammable materials. Sparks from welding could start a fire.
•
Do not operate equipment unless all enclosure panels are properly installed, and
electrical cords are in good condition.
Risk of Electrical Shock and Pinch Points.
•
Always wear protective face shield and other PPE when working with batteries. Risk of
chemical burns
•
Before using any welder, consult your physician if you have a pacemaker or any other
medical conditions.
Risk of death or personal injury.
•
Failure to take basic safety precautions can result in serious injury and/or property
damage
•
Provide covers or other protection for items near the work area to prevent damage
from sparks, welding arc or accidental contact.
•
Batteries must be properly maintained; improperly maintained batteries may short out
or explode.
•
Contact Factory Service or your local dealer for all repairs or service to unit.
WARNING – Machine must always remain in upright position!
•
Shut down unit, and disconnect input power before inspecting, maintaining or servicing
the welder.
•
Unplug the welder from the wall outlet before servicing, cleaning, or maintenance. Risk
of electrical shock.
•
Cigarettes, sparks or other ignition sources could cause battery to explode. Always
shield eyes and face from battery. Do not charge, use booster cables or adjust post
connections without proper instructions and training. Keep vent caps tight and
batteries level.
•
Do not place the welder on unstable or uneven ground. The welder might tip causing
personal injury or serious damage to the welder and other property.
•
Do not operate this equipment unless the user is fully trained in the safe use of welders
and related accessories.