Aim ANET1553 Series, Руководство пользователя

Страница: 31 / 72

3. Getting started
ANET1553-x
User’s Manual
21
Figure 3.5-6 ANET Web Configuration Tool
“Maintenance”
3.6 Updating the ANET1553 module
Click on the
“ Update”
tab in the navigation.
Re-boot the ANET1553 to switch to maintenance mode.
Wait until the re-boot has been finished, then log-in (re-connect) to the ANET1553
again. Click again on the
“ Update”
tab in the navigation bar and choose the update-file
(<filename>.tar.gz), e.g. anet1553-update.tar.gz and start the update. The default
location of the update file in the BSP is /Onboard-SW/update-components/.
Figure 3.6-1 ANET Web Configuration Tool
“Update tab”