Automatic Soap Dispenser
丨 AK1205
Liquid Adjustment
Key
Cap
Indicator
Sealing Cap
Fixed Bracket
Liquid Button
1. Insert the key into the lock to
open the top cover after install
the battery
2. Open the sealing cap and pour the
liquid soap, remove the extra over
3. Put your hand under the sensor
until the liquid sprayed out
WARNING
Children should be used under adult supervision to prevent accidentally eating!
c
The unit has bee
u
.
CAUTION
At the standby status, you can adjust liquid by pressing the liquid adjustment button.
The default liqui
crease around 0.5ml output for
per press. Totall
o
may have a slight deviation.
Indicator
Liquid adjustment button
Problem
Potential Solution
Reason
LED indicator o
Control system trouble
m
Batteries
r
Circuits problem or poor contact
Block sight of indicator
r
g
Out of sensing distance
Unit fault
Short liquid supply time
Too viscous liquid
Liquid coagulation or obstruction
h
Indicator on
d
supply
liquid
supply
Tips: Please prevent debris from entering the container to avoid blocking.
Replace the controller
Check the Circuits and batteries
Re-install or replac e the batteries
Check the Circuits
Clean the indicator
Replace the batteries
Remove the sensing object
Contact the the dealer
Contact the the dealer
Adjust the liquid output
Reduce liquid viscosity
Try some times or contact the dealer
Model
Volume
Dimension
Net Weight
P
r
Sensing Distance
Liquid Supply
Temperature
5 step adjustment
After installing the batteries, t
s in the standby state.
The unit is suggested to install batteries even if you don't use it, so that the unit can automatically
run once per 72 hours in the standby status to avoid the catheter pressure adhesion.
Some of unit had installed batteries and in dormant status before delivery. Keep press setting
buttons for more
turning into standby status.
Whereas if the unit turn to dormant status after keeping press the setting button, you can also
re-installation batteries to turn the unit to standby status directly.
USER MANUAL
Using Y
our AK1205
1. The unit includes electronic devices and solenoid valve, please do not knock.
2. Caution for connecting line hen disassembling the unit.
3. Please
it using soft cloth th neutral detergent hen cleaning the
product. Next
detergent and dirt by the ung-out soft cloth, then using
dried soft cloth to dry.
4. Please do not
shing th
tering or using some detergent
h particle
such as scouring
and laundry detergent, also do not using diluent,
detergent
th high acid or Nylon brush to clean this product, lest to damage
surface or erode internal electronic components, especially be careful not to
damage transparent cover hich placed induc
to avoid decrease the
ctiveness of reaction. Tips: Ensure the distance bet
sensing
and counter top is above 35cm When installing on stainless steel counter top.
Installation
CAUTION
Troubleshooting
Specificati
on
Zhejiang AIKE Appliances Co.,Ltd.
Add: Yong'an Industry Zone, Taizhou, Zhejiang
E-mail: [email protected]
T
Website:
m
AA Batteries
