Fitting and Maintenance Instructions
Ver. 9 09/2013 (1000)
4
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all
components for their safety.
This includes:
•
PAT test for electrical items
•
Tightness of all nuts/ bolts/castors
•
Other screw in/ bolt in/ push in components.
•
Also check all upholstery for security, splits, etc.
If in any doubt, please do not issue or use, but immediately contact your supplier
for service support.
When reissuing, a risk assessment may be required as to the suitability of the chair
for a particular user.
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part
of or establishing any contractual or other commitment by Aidapt Bathrooms
Limited, Aidapt (Wales) Ltd or its agents or its subsidiaries and no warranty or
representation concerning the information is given.
Please exercise common sense and do not take any unnecessary risks when using
this product; as the user you must accept liability for safety when using the
product.
Please do not hesitate to contact the person who issued this product to you or the
manufacturer (detailed below) if you have any queries concerning the
assembly/use of your product.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any
concerns.
Do not allow children or unauthorised persons to play with the equipment or use
without proper supervision.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: +44 (0) 1744 745 020 • Fax: +44 (0) 1744 745 001 • Web: www.aidapt.co.uk
Email: [email protected] • [email protected] • [email protected]
