6
No.
Item
Model
Quantity
1
Hand Control (with
locking function)
JCH35A4
1
2
Control Box
JCB35E
1
3
Motor for Back Rest
JC35DF
1
4
Motor for Knee Rest
JC35DF
1
5
Motor for Hi-Lo/
Trendeleburg
JC35G
2
6
Power Cord
H05BQ-F
1
7
Battery
OT1.3-12
1
8
Emergency Controller
1
Circuit components are shown below;
3. ASSEMBLY OF BED
Recommended 2 person assembly. A video of the assembly is available at www.aidapt.com
A. Installing the bed frame junction block
Take out M10x20 bolt from the 50x30 rectangular tube of bed head frame, pull up the bed frame junction
block, matching the first bolt hole and fasten using M10x20 with ø10 spring washer and ø10 flat washer.
Do not over tighten the bolt, make sure the bed frame junction block can still move (see fig. 2)
ø10 Flat Washer
ø10 Spring Washer
M10x20 Bolt
fig. 2
