Aichi SV06CNL, Руководство по эксплуатации с информацией по обслуживанию

Страница: 19 / 40

Chapter 4 - Part Name
13
Upper control panel 21
Standard specifications 221
1 2 3 4 5
6 7 8
M084i120
fig. f-f
(1) Lift/travel select switch
Select the lift/travel select
switch to either "LIFT" or
"TRAVEL." Hold it more than 0.3
second and then release the
switch, the power indicator light
goes on and the alarm buzzer
sounds. Start operation within 3
seconds after releasing the switch.
NOTICE
• This switch is canceled if any of the
upper control function is not operated
more than 3 seconds after releasing the
switch.
• This switch is canceled, even if the
switch is selected and held, if any of the
upper control function is not operated
more than f0 seconds.
(2) Power indicator light
When the power indicator light
goes on, the upper controls
are available, and the alarm
buzzer sounds. When this light
is going off or blinking, release all function
switches once, then select the lift/travel
select switch again.
(3) Overload warning light / Tilt light / System
failure light
• Overload warning light: When
the platform is overloaded, this
light blinks, the alarm buzzer
sounds and all of the functions
are disabled.
• Tilt light: When the machine
is on a slope, this light goes
on, the alarm buzzer sounds
and platform lift up function is
disabled.
• System failure light: This light
goes on or blinks, in the event
of a computer control system
failure.
(4) Horn switch
Push the horn button and the
alarm horn will sound. Release
the horn button and the alarm
horn will stop.
Before moving the machine, sound the
horn to warn the personnel around the
machine.
(5) Emergency stop button
Push down the Emergency stop button to
its "OFF" position to stop all functions. Pull
up the Emergency stop button to its "ON"
position to operate the machine.
(6) Steering switch
While the power indicator light
goes on by selecting the lift/
travel select switch to "TRAVEL,"
operate the steering switch to
right or left and the steering wheels will
turn right or left. This operation is possible
even when traveling. Even when the
steering switch is returned to neutral, the
steering wheels will not return to neutral.
(7) Lift/travel joystick controller
• While the power indicator light
goes on by selecting the lift/
travel select switch to "LIFT,"
operate this joystick controller
to raise or lower the platform.
• While the power indicator light
goes on by selecting the lift/
travel select switch to "TRAVEL,"
operate this joystick controller
to the traveling direction.
(8) Not use.