AIC SB101-SP, Руководство пользователя

Страница: 28 / 80

18
Chapter 2. Hardware Setup SB101-SP User Manual
NOTE
This sections provides a basic instruction for mounting the slide rail onto the system.
Tool-less rails vary per order. The rail in this manaul may not exactly match the rail for
your system. Please refer to the spefications or quick installation guide that came with
your purchased product.
CAUTION
They rack may tilt and fall due to incorrect installation or placed on uneven grounds.
The rack must be placed in a flat surface before you begin to slide the system barebone
in for servicing.
1. Pull the inner rail out of the slide rail until it clicks.
2. Detach the inner rail completely from the slide rail by pulling the white tab foreward.
3. After the inner rail is dislodged, adjust the middle rail back to its original position by
pushing the tab on the middle rail.
2�9 Slide Rail Installation
inner rail
white tab
detached inner rail
middle rail
tab
outer rail bracket with adjusted
middle rail