AIC SB101-SP, Руководство пользователя

Страница: 16 / 80

6
Chapter 2. Hardware Setup SB101-SP User Manual
This section describes a simple instruction guide for installing the hardware components
on the serverboard system.
NOTE
Safety precautions before setup:
• Be aware of the placement of the system device.
• Make sure the components are cooled before touching.
• Dislodge the cables and connectors before removing the hareware component.
2�1 Central Processing Unit Setup
The serverboard supports dual Xeon scalable processors and Socket P0 (LGA-3647).
2�1�1 Processor Installation
To ensure a safe and easy setup, you need to prepare before installation:

a T20 Torx screwdriver

ESD wrist strap/mat and conductive foam pad
CAUTION
The pins of the processor socket are vulerable and easily susceptible to damage if fingers
or any foreign objects are pressed against them. Please keep the socket protective cover on
when the processor is not installed.
CAUTION
When unpacking a processor, hold the processor only by its edges to avoid touching the
contacts.
Standard Processor Assembly:
A standard processor assembly is comprised of PHM(Processor Heatsink Module)
components and processor socket assembly.
Chapter 2� Hardware Setup
Heat sink
Standard
Processor Clip
Standard
Processor
Bolster Plate
Precsessor
Socket
PHM Components
Processor
Socket Assembly