AHT MACAO 100, Руководство по эксплуатации

Страница: 39 / 506

en | AHT Cooling Systems GmbH Operation | 10
405859_1_0819 39 / 505
NOTICE
Material and property damage due to missing
parts in the appliance.
Check the packaging for loose parts.
Do not dispose of loose parts; clarify their use with the
maintenance service (see
→ Maintenance services).
Start up the appliance
1. Connect the mains plug on the connecting cable
(see
→ Electrical connection).
2. appears on the display, press for at
least 3 s (see
→
page 11, chapter 5 ).
After start-up, it may take up to 3 to 4 hours until the
desired temperature is reached.
10 Operation
Only trained operating personnel may operate the ap-
pliance.
WARNING
Damage to the electrical system and/or
the refrigerant circuit.
Contact with live parts may result in electric
shock. Flammable refrigerant can escape and
cause an explosive gas/air mixture. Fire haz-
ard due to sparking or overload.
▪
Do not allow external forces to act
on the appliance, e.g. careless han-
dling with a lift truck or floor clean-
ing machine.
▪
Avoid transmitting pulsations and vi-
brations to the appliance.
▪
Observe safety notices and warnings
for appliances with flammable refrig-
erants (see
→ Flammable refriger-
ants).
▪
If the appliance is damaged or the
fuse is tripped:
1. Disconnect the appliance.
2. Secure the appliance against reconnec-
tion.
3. Contact the maintenance service (see
→
Maintenance services).
CAUTION
Glass / material breakage.
Body cuts. Impact injuries.
▪
Do not apply any load to the lid.
▪
Do not climb onto or into the appli-
ance.
▪
Check glass elements and plastic
frames for damage, e.g. cracks,
breaks. In the event of damage,
promptly contact the maintenance
service (see
→ Maintenance ser-
vices).
Broken glass.
Hand and body cuts.
▪
Use protective gloves to remove split
glass parts and goods that may have
been damaged as a result.
▪
Carefully and completely remove all
split glass parts and damaged goods.
Leakage of condensation water.
Slipping hazard.
▪
Check for puddles in front of and un-
der the appliance.
▪
Promptly remove leaking condensa-
tion water.
▪
Contact the maintenance service
promptly (see
→ Maintenance ser-
vices).
NOTICE
Material damage due to misuse.
Operate the appliance in a stable operating
position (horizontal alignment).
▪
Check that the appliance is in good, proper
condition. Any damage must be repaired im-
mediately.
▪
Only operate the appliance with the sliding
feet mounted.
Property damage due to misuse.
▪
Do not operate the appliance above the cli-
mate class stated on the rating plate (see
→
Rating plate and serial number).
▪
The ambient temperature must not fall below
16°C (60.8°F).
▪
Observe the prescribed storage temperature
of the stored products.
▪
Check the interior temperature (see
→ Tem-
perature display).
▪
In the event of a power failure, stored goods
must be checked by the operating company
(temperature check).
▪
Check the area in which goods are placed for
foreign objects. Remove goods stored incor-
rectly immediately.
▪
Remove food residues, spilled liquids, and
packaging residues (see
→ Basic cleaning).
▪
Only operate the appliance with its lids.
▪
No objects may be stuck in-between the lid
and cover frame.
▪
Check if the lid is closed.
For special climatic conditions with high humidity, con-
densation (condensation water) may form inside the
appliance or occur on the air outlets at the top. This
condensation must be removed for hygienic reasons.