4(10)
25.7.2015
Ahlsport, retailers or any other persons or companies cooperating with Ahlsport will not
assume responsibility for any property damages or accidents caused by
Fitpole
. If the risk
for accidents or damages is not accepted, the pole should not be used or even removed
from its packaging.
Installation instructions
Contents of the package
Fitpole
package contains the following parts (see Picture 1).
- Base
- Ceiling mount with a tightener/adjuster
- Washers (2 pcs)
- Set wrench (2 pcs) for mounting the pole
- Hex wrench for tightening the lock screw
Picture 1.
Fitpole package contents (the package might look different)
If all the parts shown in the picture are not present or if you feel that something
is missing, please contact the sales point.
Installation location
Fitpole
cannot be used with false, suspended or flexible ceilings. If you are not sure
whether the ceiling is suitable, please contact a building professional or the sales point.
Most ceilings, such as drywall ceilings, might bend because of the pressure caused by the
pole. This may result in nails or screws protruding through the drywall panels. The
pressure might cause structural changes (smoothing) in dash bond coated ceilings. Also
dents are possible, especially with vinyl flooring. If you do not accept the possibility of
damages, do not install
Fitpole
at all. Choose a proper place for exercising and dancing.
To test that there is enough free space around the pole, walk around the pole with your
arms open and check that there is nothing on your way. As a rule the pole should be
installed inside in a circle with a diameter of at least 3 to 3.5 m.
