Ahlborn ALMEMO 470 Скачать руководство пользователя страница 79

Страница: 79 / 108

8 Settings

- 79

–

8.2.7 How to automate Sensor Supply and Settling Time

ALMEMO

Sensors that are powered via the sensor supply of the

ALMEMO

wireless interface will possibly consume permanently a lot

of current. To save energy and to extend the battery life, the sensor
supply can be switched off whenever no measured values are
queried from the ALMEMO

sensor.

For sensors that require some time for the transient oscillation before

a measured value can be queried, a settling time can be set.

To extend the battery life during sleep mode, the sensor supply will

be automated by default as soon as the sleep mode is enabled for a
wireless ALMEMO

interface. If required, the sensor supply can be

permanently provided despite enabled sleep mode.

1. In the home screen, tap on Sensor overview

2. Tap on the arrow at the end of the line of the wireless sensor, of which

you want to automate the power supply.

3. Tap on

Power settings.

4. Tap on the button next to

Sensor supply permanently

, so that the

button is grey and contains the word OFF.

➢

The sensor of the ALMEMO

sensor will only be supplied via the

sensor supply when a measured value is queried.

5. Tap on the field next to

Settling time

6. Enter the desired settling time.

7. Tap on OK.

➢

During an automated query the sensor of the ALMEMO

probe will

now be supplied for the set settling time before the query and during
the measured value query by the sensor supply.

8.2.8 How to find the Software Version of the Wireless

Sensor

The wireless sensor needs to be connected to the data logger.

1. In the home screen, tab on Sensor overview

Содержание ALMEMO 470













































































































Результаты поиска

Содержание ALMEMO 470

Отзывы:

Похожие инструкции для ALMEMO 470

Бренды по названию

Популярные бренды

Ahlborn ALMEMO 470, Инструкция по эксплуатации

Результаты поиска

Содержание ALMEMO 470

Отзывы:

Похожие инструкции для ALMEMO 470

Бренды по названию

Популярные бренды