https://www.agrotkindustrial.com/
P14
OPERATION INSTRUCTIONS
main shaft—(direction of the rim installation surface is inside)
—main shaft — tower spring (big side inside )
—wheel —quick nut suitable cone (small side inside) —quick nut
Note: When install or remove the wheel,it is not allowed to slide the wheel on main shaft
screw,to avoid any scratching.
1)turn on the power switch
2)input a b d value
(Automatic input gauge is optional function .No automatic gauge please
enter manually)
●
distance (a) value: pull the scale to the position as in pic.1 and hold it for 4 seconds, read this value
from measuring scale, and input the value manually through
.
●
width (b) value: read it directly from the rim or measure it by equipped caliper as in pic.2, and
input the value manually through
●
diameter (d) value: read it directly from the rim, and input the value manually through
Pic.1
Pic.2
4) put down the hood or press
key to rotate the wheel
5) After the wheel stops, the digital tube displays unbalanced weight
，
press
key to read actual
unbalance weight.
6) Slowly rotate the tire counterclockwise by hand until the indicator light outer is all on. At this
time, the highest point (12 o' clock) of the outer rim is the correct point of the unbalance. Add
corresponding weight lead at this position.
See Pic.3
