OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
134
Fig. 155
7.5
USING THE TRACTOR CAB
This chapter provides some instructions for handling the cab doors and windscreens.
7.5.1
CAB DOORS
Opening the doors
•
To open from the outside, push the button on the handle and pull the door towards you.
•
To open from the inside, pull the lever on the mechanism towards you and open the door
by using the handle.
The cab is equipped with a lock which enables locking the doors to prevent unauthorized
persons from entering the tractor. The lock is installed in the button of the external handle.
•
insert the key into the lock;
•
turn the key to the left to lock the door;
•
turn the key to the right to unlock the door.
7.5.2
FRONT WINDSCREEN
Opening the front windscreen
•
To open the front windscreen, turn to handle to the left (anti-clockwise direction).
•
Release the handle. The windscreen will slowly open to the final position by means of
gas springs.
•
To close the windscreen, grab the handle and slowly move it towards you. Close the
windscreen by turning the handle to the right (clockwise direction).
Содержание AGT 106
