Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 38 / 131

USER MANUAL – rev.2016/12 AGS 2500/3000 EN-HP
page
28
7.11.2 Complete cleaning of sprayer
Complete cleaning of sprayer includes cleaning of all internal parts of the sprayer: tank, filter,
pump, regulator and nozzles. Direct clean water through valve for discharge from the tank
(pos. 16 – figure 3) towards the suction valve (pos. 7 – figure 18), which must be directed for
pumping clean water from additional tank. Direct three-way valve for excess liquid (pos. 8 –
figure 18) back towards the main tank, and direct the selection valve to turn on tank rinsing.
At complete cleaning of the sprayer it is advisable to also clean the filling container. Redirect
selection valve in filling container direction and engage valve for use of packaging rinsing
(pos. 8 – figure 11) on the container. After completed cleaning, close the valve and suck water
back into the tank through injector nozzle. Make sure that the cover of filling container is
closed during cleaning!
When you have washed the tank interior and have pumped all the water from the additional
tank, redirect suction valve (pos. 8 – figure 18) to suction from the main tank, and move
selection valve to spraying, to empty the tank through spraying nozzles.
Direction of valve flow is marked on the valve lever with an arrow. Correct setting of valves
for complete cleaning of sprayer is displayed in the figure below (figure 16).
Figure16: COMPLETE CLEANING OF SPRAYER