Agromehanika AG-TRONIK S1, Инструкция по эксплуатации, Страница: 48 / 50

AG-TRONIK
48
Figure 63 Figure 64
•
Speed sensor is connected to bottom part of connection cabinet (4-pole connector) for driven
sprinklers.
•
For carried sprinklers, it is connected directly to AG-TRONIK.
9.11. Speed Sensor (additional equipment)
•
Speed measurement, if performed through induction
no-contact sensor.
•
On driven sprinklers, the sensor is installed on rear
right wheel axle
•
On carried sprinklers, it is installed on tractor
housing and measures passages of wheel nuts.
•
Distance of sensor from mark is also important, which
should be between 3 and 5 mm
•
You can also use the signal from the tractor, for which
you need a connecting cable (018.60.530)
•
Enter the correct speed constant in AG-TRONIK (Chapter 5.3).
Figure 66 Figure 67
Figure 65