INSTRUCTIONS FOR USE
AGS 1800 - 2000 EN-HV (HVB)
Rev.9/2018
37
7.7
NOZZLE FOR CLEANING INTERIOR OF MAIN RESERVOIR
Figure 7.6
Nozzle is mounted in the interior of main
reservoir and is intended for washing of
reservoir's interior after finished spraying. It is
connected to one of the supply valves on pressure
regulator, which, when open, provides required
water for cleaning.
7.8
FILLING CONTAINER
The filling container is designed for mixing and pumping the spray into the main tank. It installed on
the left side of the main tank. It can also be mounted on the manual trapeze lifting mechanism, which
is used to adjust its height for dispensing chemicals. The filling container consists of: control valves
(1) installed on the reservoir, the injection nozzle (5), the shut-off valve (4), the mixing nozzle (3) and
the rinsing nozzle for washing the packaging and the filling container (2). The entire system is
connected to the valve installed on the pressure line (6).
Figure 7.7
Figure 7.8
WARNING: The nozzle shape shown in the figure is symbolic and may not
reflect the actual state of equipment on the sprayer!
Содержание 12 HLX
Страница 2: ...INSTRUCTIONS FOR USE AGS 1800 2000 EN HV HVB Rev 9 2018 1...
Страница 24: ...INSTRUCTIONS FOR USE AGS 1800 2000 EN HV HVB Rev 9 2018 23 4 2 SPRAYER COMPONENT PARTS Figure 4 4...
Страница 28: ...INSTRUCTIONS FOR USE AGS 1800 2000 EN HV HVB Rev 9 2018 27 4 4 FUNCTION SCHEME Figure 4 5...
