Agrisem 5 Series Скачать руководство пользователя страница 76

Страница: 76 / 130

User manual - Maximulch - Series 3 | Series 5 | Series 6

Operation

NOTT-GB-708-A

06/12/2019

Adjusting the hydraulic drawbar

Add or remove shims to increase or reduce the

working depth of the front row of discs.
To increase the number of shims, open valve (2) and

actuate the corresponding auxiliary control valve to

extend the drawbar cylinder. Insert the necessary

shims, then retract the drawbar cylinder by means of

the corresponding auxiliary control valve.

NOTT-0289

Fig. 69

6.9.4. Control wheels

The control wheels support the extensions to ensure

the correct working depth when working. These

wheels also support and lock the extensions during

transport by road.

NOTT-0330

Fig. 70

6.10.

Adjusting the left-hand side deflector

The left-hand side deflector may be adjusted to limit

the spraying of soil from the first row of discs when

working.
1 - Loosen the lock nuts and screws (1).
2 -

Set the deflector to the required position.

3 - Retighten the screws (1) and the lock nuts.

NOTT-0293

Fig. 71

Содержание 5 Series



































































































































Результаты поиска

Содержание 5 Series

Отзывы:

Agrisem 5 Series, Руководство пользователя, Страница: 76 / 130

Результаты поиска

Содержание 5 Series

Отзывы: