AgriMetal 4413 страница 2 Скачать руководство пользователя

Страница: 2 / 59

SAFETY

SAFETY ALERT SYMBOL

Why is SAFETY important to you?

The Safety Alert symbol identifies

important safety messages on the

AgriMetal Leaf and Debris Collector

and in the manual. When you see

this symbol, be alert to the possibility

of personal injury or death. Follow

the instructions in the safety mes-

sage.

This Safety Alert symbol means

ATTENTION! BECOME ALERT!

YOUR SAFETY IS INVOLVED!

Accidents Disable and Kill

Accidents Cost

Accidents Can Be Avoided

3 Big Reasons

WARNING

Indicates a potentially hazardous

DANGER

- Indicates an imminently hazardous

CAUTION

Indicates a potentially hazardous

situation that, if not avoided, may

result in minor or moderate injury.

It may also be used to alert against

unsafe practices.

situation that, if not avoided, could

result in death or serious injury, and

includes hazards that are exposed

when guards are removed. It may

also be used to alert against unsafe

practices.

situation that, if not avoided, will re-

sult in death or serious injury. This

signal word is to be limited to the

most extreme situations typically

for machine components which,

for functional purposes, cannot be

guarded.

SIGNAL WORDS:

Note the use of the signal words

DANGER,

WARNING

and

CAUTION

with the safety

messages. The appropriate signal word for

each message has been selected using the

following guide-lines:

SI NO LEE INGLES, PIDA AYUDA

A AIGUIEN QUE SI LO LEA PARA

QUE LE TRADUZCA LAS

MIDIDAS DE SEGURIDAD.

If you have any questions not answered in this manual or require additional copies or the manual is dam-

aged, please contact your dealer at AgriMetal Inc., 1006 Rue Principale, Wickham, Quebec, Canada, J0C

1S0. Phone (819) 398-6883 or fax (819) 398-5311.

Содержание 4413




























































Результаты поиска

Содержание 4413

Отзывы:

Похожие инструкции для 4413

Бренды по названию

Популярные бренды

AgriMetal 4413, Руководство пользователя

Результаты поиска

Содержание 4413

Отзывы:

Похожие инструкции для 4413

Бренды по названию

Популярные бренды