Agria Cyclone 5900 Скачать руководство пользователя страница 67

Страница: 67 / 88

Maintenance and Repair

Hydrostatic implement carrier agria 5900 Cyclone

Storage

If the machine is out of operation for an extended period:

(1)

Clean

. Touch up the paint.

(2) Spray

all bare parts

and mower head with bio corrosion-inhibiting oil.

(3)

Preserve the engine.

Petrol engine

•

Completely drain the fuel outdoors into a suitable container.

Petrol is highly flammable and explosive under certain conditions!

Never smoke in the working area. Stay away from naked flames and sparks.

Alternatively

fill the fuel tank completely and add a fuel stabilizer (Agria no. 799

09) to the fuel

- Observe the operation instructions!

Let the engine run for approximately 10

minutes.

•

Change engine oil.

•

Fill a teaspoon (approximately 0.03 l) of engine oil into the sparking-plug hole.
Slowly crank the engine.

•

Reinstall the sparking plug and set the piston with the cable-pull starter to com-
pression (slowly pull at the starter handle until you can feel resistance). The
valves are now closed.

•

Slowly crank the engine every 2...3 weeks (sparking-plug connector removed!)
and set the piston back to compression.

Содержание Cyclone 5900

























































































Результаты поиска

Содержание Cyclone 5900

Отзывы:

Бренды по названию

Популярные бренды

Agria Cyclone 5900, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание Cyclone 5900

Отзывы:

Бренды по названию

Популярные бренды