Agria Bison 5900 Series Скачать руководство пользователя страница 25

Страница: 25 / 92

3 Devices and Operating Elements

Hydrostatic Implement Carrier

agria 5900 Bison

Clutch

The clutch is operated by the safety lever and

the manual clutch lever (B/5).

•

The machine is disengaged when the man-

ual clutch lever is pulled in position "O". This

means that the engine no longer drives the

machine.

•

The machine is engaged when the safety

lever is pressed and the manual clutch lever

is released to position "I". This means that

the engine drives the machine.

•

Ensure that the coupling is properly adjusted

so that it does not slip during operation. See

page 67.

Do not park the machine for too long a time

with released safety lever or disengaged clutch

while

the engine is running.

This can damage

the clutch release bearing.

PTO shaft shifting

The gear-independent PTO shaft (A/22) is

switched on with the shifting cable (B/7).
The PTO shaft drive is switched off when the

shifting cable is pulled back. It is switched on

when the cable is pushed forward.

Содержание Bison 5900 Series





























































































Результаты поиска

Содержание Bison 5900 Series

Отзывы:

Бренды по названию

Популярные бренды

Agria Bison 5900 Series, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание Bison 5900 Series

Отзывы:

Бренды по названию

Популярные бренды