Agria 9600-112 Скачать руководство пользователя страница 62

Страница: 62 / 92

5 Maintenance and Repair

Remote-controlled High Grass Rotary Mulcher

agria 9600-112

Machine

Blades

Check blades for wear and damage every
25 hours of operation

1. Move blades to the highest position of the

cutting height adjustment. Switch engine off.

Switch ignition off and remove the

spark plug connector!

3. Check the blades (1), retaining screws (2),

blade carrier (3) and the blade shaft (4) for
damage. You can rotate the blade shaft man-
ually, so that you can check all blades.

Wear protective gloves!

4. Replace damaged blades.

The replacement of blades (1) should only be
carried out by a specialist workshop. Contact

- agria-Service -

if the blade shaft is dam-

aged.

Blade replacement

If it is evident that the blades (1) are too worn for further use, they must be replaced.

Switch off the ignition and remove the spark plug connector!

Wear protective gloves!

Disassembly / assembly of the blade carrier (3) with wrench size 37.

To remove the blades, unscrew the retaining screw (2). Mount new blades.

After changing the blade, secure the screws with screw lock (e.g., Loctite 270).

Always replace blades on a blade carrier (3) in pairs - left and right simultane-

ously.

The arrangement of the blades must be as mounted in the original layout.

Содержание 9600-112





























































































Результаты поиска

Содержание 9600-112

Отзывы:

Похожие инструкции для 9600-112

Бренды по названию

Популярные бренды

Agria 9600-112, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание 9600-112

Отзывы:

Похожие инструкции для 9600-112

Бренды по названию

Популярные бренды