Agri-Fab LST 42A, Руководство пользователя

Страница: 8 / 28

8
FIGURE 10 RIGHT SIDE VIEW
INSTALLING HANGER BRACKETS
For better clearance, lower the tractor's suspension arms
using the attachment lift lever.
On Tractors With Foot Rest Brackets
(Figure 7)
1. Remove the bolt and nut that fasten the L.H. and R.H.
foot rest brackets to the frame. See fi gure 7.
2. Attach the L.H. Hanger Bracket (marked "L") to the inside
of the tractor frame using two 3/8" x 1" carriage bolts,
3/8" lock washers and 3/8" hex lock nuts. The bolt heads
go on the inside of the tractor frame. Repeat for the R.H.
side. See fi gure 7.
FIGURE 8 LEFT SIDE VIEW
FIGURE 7 LEFT SIDE VIEW
On Tractors Without Foot Rest Brackets (Figure 8)
3. Find the empty hole beneath the foot rest. Attach the
L.H. Hanger Bracket (marked "L") to the inside of the
frame using a 3/8" x 1" carriage bolt (head to inside), a
3/8" lock washer and a 3/8" hex lock nut. See fi gure 8.
Repeat for the R.H. side.
2. Assemble a shoulder bolt and 3/8" hex lock nut to the
R.H. side of the tractor frame, using the fi rst empty hole
to the rear of the R.H. hanger bracket. See fi gure 10.
FIGURE 9 LEFT SIDE VIEW
INSTALLING SHOULDER BOLTS
All Tractors
1. Remove the bolt, washer and nut which fasten the sway
bar bracket to the L.H. side of the tractor frame. Replace
with a shoulder bolt and a 3/8" hex lock nut as shown in
fi gure 9.
BOLT REMOVED
FROM THIS HOLE
3/8" x 1"
CARRIAGE
BOLT
3/8" LOCK
WASHER
3/8" HEX
LOCK NUT
L.H. HANGER
BRACKET
SUSPENSION ARM
3/8" x 1"
CARRIAGE
BOLT
3/8" LOCK
WASHER
3/8" HEX
LOCK NUT
L.H. HANGER
BRACKET
SUSPENSION ARM
BOLT REMOVED
FROM THIS HOLE
SWAY BAR
BRACKET
SHOULDER BOLT
3/8" HEX
LOCK NUT
SHOULDER BOLT
3/8" HEX
LOCK NUT
R.H. HANGER BRACKET