Using the Scope Functions
3
Agilent U1602A/U1604A User’s and Service Guide
115
To Save Waveform
The instrument saves the configuration settings and waveform
simultaneously. To save waveforms to a USB flash memory device, follow
the instructions below:
1
Connect a USB flash memory device, press and hold
to access
Save/Recall menu.
2
The display lists the flash memory’s contents.
3
Press F1 to save the waveform. You will be prompted to input filename
for the waveform.
4
Turn the rotary switch to move the cursor to the desired character
from the list of characters located at the bottom of the screen.
5
After completion of entering the filename, press F1 to save the
waveform into USB flash memory device. The filename with *.svw
extension will appear in the file list.
To Load Waveform
When downloading a waveform from USB flash memory, you are prompted
to select the file to download from the list of USB flash memory contents.
Do the following to load a waveform from the external memory device:
1
Connect a USB flash memory device. Press and hold
to access
Save/Recall menu.
2
The display lists the flash memory’s contents. Turn the rotary switch to
move the cursor to select the file.
3
Press F2 to load the waveform. The horizontal and vertical scale factors
will appear at the bottom of the waveform display area.
N O T E
The filename can be configured for English capital letters and numeric numbers. The
backspace is used to delete the previous character when entering the filename.
Clear is used to clear all entered characters when entering the filename.
