Agilent Technologies TS-5410, Руководство по подготовке места и установке

Страница: 14 / 30

14 Site Preparation Chapter 1
System Requirements
This section provides additional specifications for installing the Agilent
E22xxA Test System. This information will be useful for initial site
preparation, as well as for later reference if it becomes necessary to move the
system to a different location.
Anti-Static
Precautions
Static electricity is destructive to your production process and your Agilent
E22xxA Test System. Careless handling and poor site planning can cause
system reliability problems and reduce your product yield. The system may
not be as easily damaged as the modules you will be testing, but good
anti-static planning will help ensure high reliability.
Caution
The system test rack is secured to the pallet of the shipping
crate and wrapped with a plastic wrap. Do not move the crate or
the test rack and pallet to a static sensitive area until you have
removed the plastic wrap from the test rack.
While not an exhaustive list of anti-static precautions, here are some
suggestions to consider as you plan your system area:
Table 1-2. Suggested Anti-static Solutions for Site Planning.
Precaution Suggested Solution
Anti-static flooring Plan to use an anti-static floor covering or
mats.
Grounding straps Plan for foot straps in conjunction with
anti-static flooring and wrist straps for
system operators.
Anti-static UUT storage Plan for anti-static tote bins for your
units-under-test and storage for anti-static
bags.
Anti-static hardware Consider the use of any devices that will
help you maintain a static-free
environment. Examples are wrist strap
testers and ion generators.