Agilent Technologies R Series Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 220

Agilent Technologies R Series Скачать руководство пользователя страница 39

5

Chapter 1: Introduction

BenchCel Microplate Handling Workstation R-Series User Guide

Safety shield

The clear acrylic panel that is installed on the front of the
BenchCel device to restrict access while it is in
operation.

!! INJURY HAZARD !!

Do not operate the

workstation without the safety shield.

Rack-release
button

The button that unlocks the rack for removal. The rack-
release button at the top of each stacker head displays
different colors to indicate the state of the stacker head:

❑

Solid green.

The stacker rack is installed correctly on

the BenchCel device and the microplates are
unloaded. The stack of microplates are ready for
processing or you can unlock and remove the
stacker rack.

❑

Flashing green

. The stacker rack is unlocked and can

be removed.

❑

Solid blue

. The stack of microplates is loaded. You

cannot unlock and remove the stacker rack.

Robot head

The component that moves horizontally along the

x

-axis

and vertically along the

z

-axis.

Robot arms

Two parallel structures that are attached to and rotate
about the robot head along the

theta

-axis.

Feature

Description

X-axis

+

Z-axis

+

--

--

Theta-axis

+

--

«
...
37
38
39
40
41
...
»

Содержание R Series





























































































































































































































Отзывы:

Нет отзывов