Agilent Technologies R Series, Руководство пользователя

Страница: 31 / 220

v Preface
BenchCel Microplate Handling Workstation User Guide
What this guide covers
What is covered
This guide covers the description, installation, setup, and operation of
the BenchCel
®
Microplate Handling Workstation R-Series.
What is not covered This guide does not provide instructions for the following:
❑
BenchWorks™ Automation Control software or third-party software
❑
Velocity11 devices, such as the PlateLoc
®
Thermal Plate Sealer, the
VCode
®
Barcode Print and Apply Station, and the VPrep
®
Pipetting
System
❑
Third-party devices
For more information about these topics, see the relevant user guides for
these products.
Software version
This guide documents BenchCel Diagnostics version
15.0.22 or later
.
Related guides
The BenchCel User Guide should be used in conjunction with the
following user documents:
❑
Velocity11
®
lab automation system software user guides, such as the
BenchWorks Automation Control User Guide . These user guides
explain how to define labware, create protocols, and set task
parameters for each device in the system.
❑
Third-party device user documents. These documents explain how
to set up and use the third-party lab device.
Related topics
For more information about... See...
Reporting problems “Reporting problems” on page 135
Who should read this guide “Who this guide is for” on page iv
How to access different formats of
this user guide “Accessing Velocity11 user information”
on page vi